How to improve the life of the gearbox


Release time:

2018-11-28

The size of the load and the wear rate of the components used in the worm gear reducer will have an impact on the service life of the reducer. Excessive internal and external loads of the reducer will lead to fracture of teeth and shafts and wear of moving parts, and wear of moving parts will lead to difficulties in the formation of lubricant film, thus affecting the use of the reducer.

How to improve the life of the gearbox

The size of the load and the wear rate of the components used in the worm gear reducer will have an impact on the service life of the reducer. Excessive internal and external loads of the reducer will lead to fracture of teeth and shafts and wear of moving parts, and wear of moving parts will lead to difficulties in the formation of lubricant film, thus affecting the use of the reducer.

     In order to improve the service life of the reducer, first of all, we should avoid excessive load selection of the parts driven by the reducer, and select the reducer with suitable load according to the actual working conditions. Reasonably control the wear of the bearings and gears inside the full-formed reducer, as far as possible to ensure that its bearings inside and gear meshing between the formation of full fluid power lubricant film.

     When the reducer is installed, avoid excessive additional force due to poor teaming, insufficient fit precision, excessive vibration and other factors. Thus, the reducer is damaged. This type of failure in the early stage or operation of the reducer, should be found and resolved in a timely manner, otherwise it may vibrate the load and lead to wear and tear deceleration or bearing running rings and other abnormalities, reducing the service life of the reducer. Daily maintenance should be done to check the wear and tear, cracks, scale accumulation, etc. of the drive components of the reducer, these factors can lead to excessive external loads, thus reducing the service life of the reducer.

     In addition to ensure good lubrication, the formation of full fluid power lubricant film can effectively improve the service life of the reducer. Reasonable selection of lubricants, to ensure the cleanliness of the lubricant, to ensure adequate lubrication of the machine, regular inspection of the oil quality, timely replacement, so that "according to the quality of the oil change" These are important prerequisites to ensure the service life of the speed reducer.